How to through the operation process to cut loss of optical fiber fusion welding machine?

by:Tumtec      2020-05-19
How to through the operation process to cut loss of optical fiber fusion welding machine? Many welding personnel all construction group from the company or telecommunication authority distribution of optical fiber welding machine, optical fiber welding machine has a fixed cannot choose, but only in the process of construction to improve the quality of welding by artificial operation specification. 1, optical fiber cutting specifications, cutting Angle 0. Less than 5 degrees. Now optical fiber welding machine is fully automatic welding, the optical fiber into the welding machine does not press the start button after welding, so can be set to semi-automatic welding mode, make fiber on screen Angle, if accord with a standard point of view, in the weld button, if can not meet the standard, can the new cutting fiber. : as shown on the left side of fiber is 0. 35 degrees, on the right side of the optical fiber to 1. 09, optical fiber can from the new cutting on the right. 2, discharge calibration. Any kind of welding machine, now has a discharge correction function, this function is used to the weather changes or after welding machine to use time is too long, the current voltage instability caused by the welding quality is not stable, this function can be in alignment with the most appropriate voltage is suitable for various local environment; So proposal, in use after a period of time to use the next function, to ensure the quality of welding. The above two steps in order to ensure the loss of optical fiber fusion welding machine is the most basic way.
Custom message
Chat Online 编辑模式下无法使用
Chat Online inputting...