Welcome to the introduction of Tumtec 4 motors active v-groove cladding splicer FST-18S. Combined with novel design, craftsman-level manufacturing technique, it updates to high-precision algorithm to reach the fast splicing 5s, fast heating 13S for multiple fiber types: SM/MM/DS/NZDS.. Fast heating 13s, its been preset with 5 kinds of heating modes (20mm/30mm/40mm/50mm/60mm); Users can adjust the heating modes according to their applicable scenarios and habits, 50 kinds heating modes can be edited and stored.In terms of software intelligence, FST-18S is equipped with a high-precision motor and a 90-degree dual CCD array. Based on advanced components, excellent recognition algorithms, it automatically discharges and cleans before splicing, checks the cleaving angle and clean level of the end face and whole bare fiber. The degree of cleanliness is displayed in the high-definition LCD screen through photoelectric conversion.User only needs to place the fiber right on the three-in-one fiber holder, and the FST-18S can be automatically spliced. Machine presets 41 splicing modes, and user can edit modes manually. Machine can adjust itself according to the environment, suitable working altitude is 0-5000m, relative humidity is 0-95%, max wind is 15m/s. The UI interface of Tumtec fusion splicers has been scientifically designed and improved, and the operation menu is fashionable and intuitive, which is convenient for user performance. Combined with key button to ensure working efficiency.Tumtec FST-18S weighs 2kg; 1.7kgs without rubber protection. Main body made by metal with rubber protection provides good anti-drop performance. High capacity battery also controlled in the most elegant shape and weight was prove for the success of R & D. 18S battery 5200mAh, can support 280 times splicing; Electrode can be stably discharged 5000 times. Tumtec splicer’s stable quality relies on the efficient integration of industry chain. The cost-effective machine and its accessories meet the actual practical needs of the users. Besides Tumtec 18S, Tumtec FTTH model FST-18H is also a great option.
Keep moving forward, Tumtec fusion splicer optimization and upgradingWith the development of optical communication and the wide application of optical fiber communication technology, the requirements for fiber alignment accuracy are higher than before. It is necessary to continuously upgrade and improve the products to meet the market demand.Keep moving forward, for the betterWhen a product is recognized in the market, upgrading and iterating with the market demand is the driving force for brand development and survival.Tumtec communication has been actively communicating with operators all over the world. Based on the demands of customers, reducing construction cost, low loss, stable performance and improving efficiency have become the market demandIn 2021, Tumtec fusion splicer launched an upgraded version to optimize and upgrade on the basis of traditional modelsInner core upgrade,Higher precision core alignment, using nano level alignmentTumtec fusion splicer core alignment FST-83A and six motor upgraded V9 +’s fiber alignment mode adopts nanometer level alignment mode, which makes the fiber alignment more accurate, faster and precise, reduces the loss to the greatest extent, and ensures good splicing quality2、 Larger and clearer mode field diameterTumtec cladding alignment fusion splicer FST-18S upgrade version which has much larger and clearer mode field diameterThe mode field diameter is used to characterize the distribution of the fundamental mode light in the core region of the single-mode fiber. In the optical fiber, the optical energy is not completely concentrated in the core, part of the energy is transmitted in the cladding, and the core diameter can not reflect the energy distribution in the optical fiber. Therefore, the concept of effective area is proposed. If the effective area is small, the density of the cross section of the optical fiber is large, and excessive density will cause nonlinear effect.So for the transmission fiber, the larger the mode field diameter is, the better. 3、 Performance improvementMachine surrounding soft rubber is upgraded, more impact resistance, drop and long distance bumpy resistanceThe battery capacity is increased and the endurance is stronger. About 300 splicing and heating reinforcement operations can be carried out in one charge. With compact V-groove and LED lighting range, the splicing operation can be better completed in the dark working environment, which solves the problems in the field construction process.4、 Wider applicationIn 2021, the upgraded version of Tumtec fusion splicer adds G654E type, which is suitable for more types of fiber and wider working range. With wide application of communication technology, fusion splicer has become an indispensable instrument in the construction and daily maintenance of optical network.Through the investigation data of users, agents and on-the-spot investigation, Tumtec has carried out the upgraded version: the nano level alignment method, which makes the fiber alignment more accurate, faster and more accurate.
With the widespread application of optical fiber in modern communication and broadband interconnection network and the wide application of optical fiber communication technology, optical fiber fusion splicer has become an indispensable instrument in optical network construction and daily maintenance. It is used in the maintenance and fusion of optical fiber layout. In order to obtain high quality spliced fiber during fusion, high precision alignment of optical fiber core is required.The optical fiber alignment and fusion technology is the basic component of optical fiber communication. The optical fiber alignment and fusion technology with high precision and low loss is of great significance for the establishment of excellent optical fiber communication network.Therefore, in the construction and daily maintenance of optical network, choosing high performance fusion splicer is an important part of the communication network work.The part which is closely related to the optical fiber alignment is the optical fiber holder and V-groove of the fusion splicer. Tumtec fusion splicer adopts three-in-one fixture, suitable for various types of fiber fusion;With the compact V-groove, precised loading of fiber, no deviation, the optical fiber positioning is fast and the working efficiency is high, which provides the guarantee for the optical fiber alignment.Observing fiber core Set up a high-definition 90° dual camera, with 800*480 high-definition touch screen, fiber core picture clear, optical fiber observation precision; during the process of splice, the environment for making splice should be clearly observed to avoid loss too big caused by dirty substance, which will guarantee the splice quality and low loss in the end. The splicer is also equipped with three LEDs, no need to worry about to make splice in dark. LED light is safety and environmental protection with long service life, fast response speed, wide exposure range, which provide a good environment for the precise loading of fiber and reduce optical fiber alignment error caused by the dark environment.In the construction of optical fiber communication network, optical fusion splicer is the hardware equipment. The choose of good hardware equipment is the guarantee of the splice quality. And excellent hardware equipment can get the result in twice with half effort, improving work efficiency.Under the same performance, the price of Tumtec fusion splicer is 1/3 cheaper than the ones of Japanese and Korean brands. Tumtec is cost-effective and your good choice of fusion splicer.
Fusion splicer is equipped with multi functional fiber holder, which will be convenient for splice, no need to change fiber holder frequently and increase efficiency.With the upgrade of fusion splicer, Tumtec fiber holders are multifunctional and suitable for various kinds of fibers like bare fiber, pigtail, drop cable etc. Tumtec fiber holder can support different diameters of drop cable and pigtail location, can make splice directly.For multifunctional fiber holder, we shall control well the distance during fiber loading. Here below are the introduction about the alignment of multifunctional fiber holderFirstly, please reserve 3mm coating after striping fiber: around 3mm coating is required on the fiber. Pls use three hold stripper to strip off the PVC and the coating, but need to reserve 3mm coatingSecondly, please make the coating end against the holder end during cuttingThirdly, please load fiber: please make coating end against the fiber holder end during fiber loading.This is to make sure the length from V-groove to electrodes are properly, make sure the fiber movement are within range during motor pushing fiber holder and guarantee the splice quality.Fiber cuttingIf it is drop cable, please use drop cable stripper to peel off the drop cable and use three-hole stripper to strip off the coating. If it is pigtail, please use three-hole stripper to peel off the yellow PVC.If it is bare fiber, please use the smallest hole of three-hole stripper to peal off the coating.Please use alcohol and cotton cloth to clean the fiber, then cut the fiber with fiber cleaver and load it in fiber holder of fusion splicer, then can make splice