Optical fiber fusion and the importance of great change and life

by:Tumtec      2020-07-06
Electrode rod is an important component of the inside welding machine, plasma welding is done through electrode stick, but there are a lot of people don't know about electrode stick is consumables, reach a certain life need to be replaced, the next I will introduce the importance of electrode bar exchange for everyone, and some knowledge of life. Electrode stick to exchange and life first to get to know the importance of the electrode stick aging process, the electrode stick with the naked eye observation is similar to the very tip of a needle, although itself metal material is hard and there will be no external force wear and tear, but due to the need for a long time under high temperature electric discharge, so start from discharge of apex, inevitably will slowly loss, of course it is an ideal state. Electrode great loss in the process of actual use as shown in the figure below, because of high energy heat discharge process of glass fiber itself ion diffusion, adsorption to the electrode bar apex, formed a conductive insulating material, in use for a period of time with the naked eye can be observed on the rod electrode these impurities. Electrode stick the exchange of insulating films, and the importance of life, will make the arc to avoid its discharge, so the wastage of the original start from the top, it is possible to start from the back of the, in the long term will intensify electrode bar apex of the wear rate, make its become very irregular. That in this case, the original have triggered the tip of the two stable arc, becomes unstable, on the welding machine is likely to alarm, Discharge the left or right) So that it can't provide the stable source of heat for the welding of the fiber, the final welding loss will not be ideal. Electrode stick exchange as well as the importance of life so electrode rod life may not be as long as we think, in the above case, in order to guarantee the quality of welding, must be replaced new electrode rod. And choose the original electrode bar is also very important, fake electrode stick is not capable of high temperature material, size is differ, such as abnormal, so not only the life of the electrode rod itself will be very short, but due to the possible causes of the discharge voltage is not stable, will bring the inside of the welding machine power device burden, or even damage. Electrode rod is an important component of the inside welding machine, plasma welding is done through electrode stick, but there are a lot of people don't know about electrode stick is consumables, reach a certain life need to be replaced, the next I will introduce the importance of electrode bar exchange for everyone, and some knowledge of life. Electrode stick to exchange and life first to get to know the importance of the electrode stick aging process, the electrode stick with the naked eye observation is similar to the very tip of a needle, although itself metal material is hard and there will be no external force wear and tear, but due to the need for a long time under high temperature electric discharge, so start from discharge of apex, inevitably will slowly loss, of course it is an ideal state. Electrode great loss in the process of actual use as shown in the figure below, because of high energy heat discharge process of glass fiber itself ion diffusion, adsorption to the electrode bar apex, formed a conductive insulating material, in use for a period of time with the naked eye can be observed on the rod electrode these impurities. Electrode stick the exchange of insulating films, and the importance of life, will make the arc to avoid its discharge, so the wastage of the original start from the top, it is possible to start from the back of the, in the long term will intensify electrode bar apex of the wear rate, make its become very irregular. That in this case, the original have triggered the tip of the two stable arc, becomes unstable, on the welding machine is likely to alarm, Discharge the left or right) So that it can't provide the stable source of heat for the welding of the fiber, the final welding loss will not be ideal. Electrode stick exchange as well as the importance of life so electrode rod life may not be as long as we think, in the above case, in order to guarantee the quality of welding, must be replaced new electrode rod. And choose the original electrode bar is also very important, fake electrode stick is not capable of high temperature material, size is differ, such as abnormal, so not only the life of the electrode rod itself will be very short, but due to the possible causes of the discharge voltage is not stable, will bring the inside of the welding machine power device burden, or even damage.
Custom message
Chat Online 编辑模式下无法使用
Chat Online inputting...