Optical fiber welding machine maintenance knowledge

by:Tumtec      2020-05-24
Optical fiber welding machine maintenance knowledge as welding machine gradually popular, a lot of new friends to weld the opportunities to question many of them can be solved to maintain, as a professional manufacturer of after-sales service, our philosophy is: don't open the machine internal cases, customers as far as possible to solve. This also need not long distance delivery, save time. Below we together to discuss about the basic knowledge of welding machine maintenance in use. A, boot no response, open welding machine, screen and buttons have no response solution: remove the battery, through the adapter directly boot, eliminate battery problem in the first place. Second, after startup, show only the icon, the machine has no other actions. Solution: 1, you push hard on the 'reset' button, and then let go, repeated several times, see if I can solve the problem; 2, remove the battery, remounted, see whether the battery contact is not good. Three, optical fiber move forward and then move forward to a certain position, the final show 'reshipment optical fiber. Solution: 1, optical fiber cutting length can not meet the requirements. 2, clean the V groove. Four, the screen dimmed and no optical fiber image, the final show 'reshipment fiber, no welding equipment. Solution: 1, adjusting equipment CMOS value 2, check the magnet of the wind cap for loss. Five, in the process of the core, and optical fiber image in the vertical direction, both ends of the fiber end face not neat, do not weld. Solution: use a sharpening of the toothpick to touch alcohol wipe down V groove single direction, several times. Then completes the end face of the optical fiber head on the bottom of the V groove V groove by pushing forward smoothness. Wipe the two microscope lens. Six, normal welding, testing large loss. The solution: arc discharge experiment and test. Warm prompt: if the electrodes are great to use time is too long, please change in time electrode rod. Normal electrode rod service life is around 6000 core. Welding machine of electrode bars and the blade is not universal, I met a customer say welding is not good, send me a look, electrodes with different length, different degree. Use inferior electrode stick or type wrong electrode rod is easy to damage the ignition coil.
Custom message
Chat Online 编辑模式下无法使用
Chat Online inputting...